COPPER FERRITE SPIRAL CORE

Eliminator Series II ignition leads have been specifically designed to cope with today’s high compression high horsepower race engines. Being fitted with three layers of Silicone jackets, they are a proven performer at carrying secondary voltages in excess of 70,000 volts whilst emitting virtually zero RFI making them compatible for use with virtually all hi-tech on board computer systems.

Eagle’s Finger Grip SPB Features

• Eagles computer designed “finger grip” Spark Plug Boot allows easy on – easy off installation.
• Unequalled durability by using our best High Temp Silicone compounds.

Terminal Features

• Zero rust 0.43mm Stainless Steel Base.
• High Memory spring steel retaining clip for positive terminal locking at all RPM’S.
• Triple cable retaining ribs and “W” shaped crimp ensure superior cable retention.

Cable Features

• Ultra low 325 ohms per metre resistance Spiral wound. Stain Steel over Ferrite coated Kevlar™ inner core.
• Nylon Tape gives exceptional tensile and terminal pull off strength.
• Three 260° C Hi-temp Silicone jackets for superior insulating properties.

The product description above is to be used as a guide only. It is up to the purchaser/end user to determine the correct suitability/application of product to suit their individual requirements. Care must be taken when selecting product. For Warranty information on above lead sets, refer to back cover.

Kevlar® is a registered trademark of DuPont™